➜ Aerial Lift Platform and Floor Machine
AERIAL LIFT PLATFORM AND FLOOR MACHINE BATTERIES IN
An L16 case stands roughly 16.5 inches tall, and that one measurement decides whether it fits your machine at all. Battery Power supplies aerial lift platform and floor machine batteries in Leesburg, Florida, for boom lifts, scissor lifts, floor scrubbers and electric pallet jacks working across Lake and Sumter Counties. We stock L16 (group 903), J305 (group 902), J185 (group 921) and GC2 deep cycle batteries, matched to your pack voltage, tray dimensions and terminal style. Rental yards, warehouses, contractors and facility cleaning crews get full sets tested and quoted before anything is ordered. Licensed and insured, 20 years behind the counter, free load testing, and old batteries recycled at no charge.
A LIFT THAT DIES AT HEIGHT STOPS THE WHOLE JOB
Industrial batteries rarely fail on a quiet afternoon. They fail halfway through a shift, with a crew standing on the platform, a floor half scrubbed or a truck half unloaded. Range shrinks for weeks beforehand. The scissor lift slows on the last lift of the day, the scrubber starts leaving streaks as brush pressure drops, and the pallet jack crawls up the dock plate.
Those are packs running out of usable capacity, and one weak battery in a series string is usually dragging the rest down. Testing each battery on its own tells you whether you need a full set or a single fix.
- Free load testing on every battery in the pack, one at a time
- L16, J305, J185 and GC2 sizes matched to your data plate
- Complete sets supplied so new and old batteries never share a pack
- Old industrial batteries collected and recycled at no charge
➜ AERIAL LIFT PLATFORM AND FLOOR MACHINE BATTERIES
DEEP CYCLE POWER BUILT FOR A FULL SHIFT
Starting batteries give a hard burst and quit. Equipment batteries do the opposite, giving up their capacity slowly through lifting, driving, scrubbing and hauling, then recovering overnight on the charger. That duty needs thick plates and a lot of amp hours in a case that fits the tray you already have. Booms and larger scissor lifts often take tall L16 units, while scrubbers and pallet jacks with less headroom run J305, J185 or GC2 packs instead.
CENTRAL FLORIDA KEEPS THIS EQUIPMENT BUSY
Construction across The Villages, Wildwood and Clermont keeps rental booms and scissor lifts moving from one site to the next. Warehouses and distribution space around Leesburg and along the US 27 corridor run pallet jacks every shift, and schools, churches, grocery stores and medical offices clean floors every night. Heat is the problem all of them share. A pack parked in a hot yard or an unventilated battery room loses water and capacity faster than the same pack would up north.
THE TRAY DECIDES MORE THAN THE CATALOG DOES.
Most wrong orders we have seen in 20 years come down to a single missed number. An L16 bought for a machine with a short compartment. A 6 volt set ordered for a 36 volt scrubber without counting how many batteries the pack needs. Terminals that do not match the existing cables. We check pack voltage, tray length, width and height, and terminal type before quoting anything, and the work stays in our own shop. Why pay freight twice on a battery that will not fit?
why choose us?
Knowledgeable
Our knowledgeable team provides reliable battery solutions and helpful guidance to ensure you get the right battery for your specific needs.
Technical Expertise
With strong technical expertise, we have the skills and experience to handle custom battery packs, golf cart batteries, vehicle batteries, marine batteries, and power sport batteries.
Customer Satisfaction
Customer satisfaction is our priority, and we strive to deliver dependable service, quality workmanship, and a positive experience on every project.
Locally-Owned and Operated
As a locally-owned and operated battery company, we take pride in serving our local community with personalized service and dependable battery solutions.
➜ WHAT WE STOCK
OUR INDUSTRIAL EQUIPMENT BATTERY RANGE
Four case sizes cover nearly every aerial platform and floor machine that reaches us, backed by flooded and AGM options and full set supply. Bring the make, model and data plate voltage, and we will match the pack.
L16
L16 Batteries, Group 903
The tallest case in the range carries the most capacity, typically 370 to 435 amp hours at the 20 hour rate in a 6 volt battery. L16 units suit booms, scissor lifts and larger scrubbers where the tray has room for height.
J305
J305 Batteries, Group 902
Often listed simply as 305, this 6 volt case delivers up to roughly 315 amp hours in a shorter body than the L16. It fits booms, scissor lifts, scrubbers and pallet jacks where compartment height is tight.
J185
J185 Batteries, Group 921
A 12 volt battery in one case, rated around 175 to 225 amp hours. Fewer batteries per pack means fewer connections to clean and fewer cells to water, which suits scrubbers, lifts and pallet jacks alike.
GC2
GC2 6 Volt Batteries
Compact and lighter at roughly 58 to 70 pounds, the GC2 fits the smallest trays and still offers 210 to 260 amp hours. Smaller electric scissor lifts, walk behind scrubbers and pallet jacks often run on it.
SEALED
Flooded And AGM Options
Flooded batteries give the most capacity per dollar and reward regular watering. AGM versions, available in several of these sizes, seal the electrolyte away, which suits indoor floor machines and crews who would rather not check water levels.
FLEETS
Rental Yard And Fleet Supply
Rental companies, contractors and facility managers ordering several packs get matched sets by date code, scheduled replacement and priority turnaround. Old cores are collected and recycled so nothing sits in the yard waiting for disposal.
FLEETS
WHICH BATTERY FITS YOUR MACHINE
Every machine loads its battery differently. Start with the equipment, then confirm against the data plate and the tray.
Aerial Booms
Booms draw hard while lifting, extending and driving at the same time. Tall L16 batteries give the most amp hours per tray, while J305 and J185 fit where height is limited.
Scissor Lifts
Scissor lifts work a full shift and charge overnight, usually on a pack of 6 volt deep cycle batteries. Larger slab scissors take L16 or J305, and smaller electric models often run GC2.
Floor Scrubbers
Scrubbers run brushes, vacuum and drive together, so capacity drives runtime directly. Tray size comes first, then the amp hours that cover your cleaning route, in GC2, J185, J305 or L16.
Electric Pallet Jacks
Pallet jacks work in short, heavy bursts all shift inside compartments with little headroom. Shorter cases such as J305, J185 and GC2 suit them best.
BATTERIES NEEDED PER PACK
Batteries are wired in series. Some machines run separate drive and lift packs, so check the manual.
Pack Voltage | 6 Volt Batteries (L16, J305, GC2) | 12 Volt Batteries (J185)
24 Volt | 4 batteries | 2 batteries
36 Volt | 6 batteries | 3 batteries
48 Volt | 8 batteries | 4 batteries
★★★★★
Excellent Service and Support
Exemplary service! Amicable, punctual, overall went well.
Chris K.
➜ THE WORD ON OUR WORK
WHAT OUR CLIENTS SAY.
Equipment owners judge a battery supplier on one thing: whether the machine goes back to work. The feedback we hear from contractors, rental yards and facility crews is that we checked the tray before quoting, sent the right size the first time, and tested honestly. Owner Eric Couture holds every industrial order to that standard.
➜ Common Questions
FREQUENTLY ASKED QUESTIONS.
These are the questions equipment owners and fleet managers bring us most often. If yours is not covered, send the make, model and data plate voltage through our contact page and we will answer it directly.
What is the difference between an L16 and a J305 battery?
Height and capacity. Both are 6 volt deep cycle batteries with a similar footprint, but the L16 stands taller and holds more amp hours, while the J305 trades some capacity for a shorter case that fits more compartments.
Are group 903, 902 and 921 the same as L16, J305 and J185?
Yes. L16 is sold as group 903, J305 as group 902 and J185 as group 921. Battery Power in Leesburg, Florida, matches both the case name and the group number so nothing gets lost between a quote and a purchase order.
How many batteries does my scissor lift need?
Divide the pack voltage on the data plate by the battery voltage. A 24 volt lift takes four 6 volt batteries, and a 48 volt machine takes eight 6 volt batteries or four 12 volt J185 units.
Can I replace just one battery in my pack?
Only if the set is young. Once a pack has seen real service, a new battery gets dragged down to the level of the older ones, so full sets are the better value in almost every case.
Should I choose flooded or AGM for a floor scrubber?
Flooded batteries cost less and hold more capacity per dollar but need regular watering. AGM batteries seal the electrolyte in, which suits indoor cleaning crews working in stores, schools and offices.
How long do aerial lift and scrubber batteries last?
Well maintained flooded sets typically give several years of shift work. Skipped watering, chronic partial charging and hot storage are what cut that short, and a mismatched charger shortens it further.
Can I put a taller battery in to get more runtime?
Only if the compartment has the height and the cover still closes. An L16 carries more capacity than a J305, but many pallet jacks and scrubbers simply cannot take the extra height.
Why buy equipment batteries from you?
Because we measure before we quote. Battery Power has served Leesburg, Florida, for 20 years, tests packs free, confirms tray size and terminals, supplies matched sets, and recycles every old battery we replace.
➜ GET YOUR FREE PACK TEST
SEND US THE DATA PLATE, AND WE WILL MATCH THE PACK FREE.
Before you order anything, find out what your current batteries are really holding and which size fits your machine. We test each battery, measure the tray, confirm terminals and pack voltage, then quote only what the equipment actually needs. Rental yards, contractors, warehouses and cleaning crews across Leesburg, The Villages and Lake County get straight answers and matched sets.
WHAT YOUR FREE PACK TEST COVERS:
- Load test on every battery in the pack
- Pack voltage confirmed from the data plate
- Tray length, width and height measured
- Terminal type matched to your existing cables
- L16, J305, J185 or GC2 recommendation with flooded or AGM options
- Free recycling on every battery we replace
